- per page
Split piece aluminum locking collars - made to hold your axle, wheel hubs, sprocket and brake hubs in place!
Bearing cassette mount bolts are a M8 x 1.25, hex head bolt. No conical or flat washers are needed. Comes in a bright yellow zinc finish.
Bearing cassette mount bolts are a M10 x 1.5, pan head bolt. No conical or flat washers are needed. Comes in a bright blue zinc finish.
This brake hub is designed to be used with a 50mm rear axle and a 6 bolt brake rotor. This magnesium hub is lightweight and comes in a matte gold finish.
This brake hub made by WildKart is designed for a 50mm axle and 6-bolt roter configuration.
This sprocket hub made by WildKart is designed for a 50mm axle and 6-hole sprocket configuration. Built durable with a polished black finish.
This 50mm magnesium sprocket hub is truly a top of the line piece. Manufactured from magnesium, it is a light-weight hub that can help you shed some rear axle weight, and look really slick in the process.
M8 x 1.25 wheel hub stud for 30mm, 40mm and 50mm wheel hubs
Having the right size wheel hub on your kart is key when dialing in your chassis. With three distinct sizes, these beefy wheel hubs look great, and make sure that you are getting every tenth of speed you can.
Save weight and earn style points with these magnesium rear wheel hubs designed for use on the 50mm rear axles. Hubs come in two different sizes: 75mm and 95mm for extra tuning options.
Keep your components in place and spinning when they are supposed to with these axle keys for the 40mm and 50mm Righetti Axles.
This bearing hanger is designed for use on 1.125" or 28mm diameter tubing and for the 40/50mm 3-bolt bearing cassette. It can also be used with the 40/50mm adjustable bearing cassette. This is the standard hanger on the 2002-2010 Brava karts, and the 2011+ Brava 4.2c and Ignite K3.
These are sold individually.
These will need to be welded to the frame.
These 50mm axle bearing provide a tight fit and a smooth roll with as little tension as possible. They come with the set screws to help keep the axle from spinning inside the bearing while on the ground.
These split bearing cassettes are for the use of 40mm or 50mm axle bearings in the older 3 bolt cassette mounting chassis. They are split at the top to provide adjustable tension on the bearing itself.
These bearing cassettes offer adjustable ride heights for dialing in your chassis cross weight to the exact settings you are looking for. They work with both 40mm and 50mm axles with 3 bolt cassette mounting.
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
