- per page
This bracket is designed for use with the MCP Billet and Ital brake caliper systems. This bracket will need to be welded to the frame.
This bearing hanger was used on Margay karts during the mid-late 1970's. These hangers will need to be welded to the chassis.
These are sold individually.
These will need to be welded to the frame.
This bearing hanger is designed for use on 1.125" or 28mm diameter tubing and for the 40/50mm 3-bolt bearing cassette. It can also be used with the 40/50mm adjustable bearing cassette. This is the standard hanger on the 2002-2010 Brava karts, and the 2011+ Brava 4.2c and Ignite K3.
These are sold individually.
These will need to be welded to the frame.
This spindle yolk was used on Margay karts before the adjustable caster options because available. It is 3" tall and has a 2.5" space for the spindle. The yolk is 1.25" wide and has 2 3/8" holes for the kingpin bolt to be placed through.
This spindle yolk is used with Margay karts that utilize the adjustable caster/camber pills. It is 3" tall and has a 2.5" space for the spindle. The yolk is 1.25" wide and has 2 3/4" holes for adjustment pills to be placed.
This spindle yolk is used with karts that feature the Sniper SA1 caster/camber system. The yolk is 2 13/16" tall, 2 5/16" inside and 1 5/8" wide. It has a recess on the top side, where the Sniper base plate rests. Yolks do not come drilled & tapped for the Sniper system
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
