Snipers' new SA1 Linear Caster/Camber Adjuster is the perfect compliment to the V2 & V4 Laser Alignment Systems. The SA1 enables adjustment of camber & caster independently to fine tune your steering geometry when utilizing the V2 or V4 Laser Alignment Systems. Adjust caster in one degree increments while enjoying infinitely adjustable camber settings, both completely independent of the other. Install one pair of SA1's on the top of your spindle mounts for independent caster & camber adjustment or install two pair on the top and bottom of your spindle mounts for maximum adjustability. One SA1 Linear Caster/Camber adjuster kit contains:
-
2 sintered base plates w/22mm mounting bosses
-
2 zinc plated sintered top plates
-
2 zinc plated spherical inserts for use with 8mm, 3/8" or 10mm kingpins, please specify when ordering
-
4-M4 x .7 FHCS base plate mount bolts
-
4-M5 x .8 top plate adjuster set screws
**Please note: This system requires a spindle hanger width of at least 1.625" (41mm). It also requires a 22mm (.866") bore to nest the base plate mounting boss. This system will not fit on Margay Ignite karts or older Margay karts with the 1.25" wide spindle hanger.
|
