- per page
This 9 1/4" front torsion tube is made to increase chassis stiffness in the Brava Rookie models. When inserted, the front end becomes more rigid allowing for increase front end grip levels.
This 12" long rear torsion tube is made to be used in the Brava 1.2 and later models. It will help increase the rear grip levels by providing a stiffer rear end.
This front torsion tube is made and cut for the use in a Margay Brava 1.2 or 4.2 chassis. Using 6 3/4" hardware, this tube can help provide a stiff front end leading to increase front end grip levels.
Need some rear end grip, but don't want to go over the top? Then this rear torsion blade is for you. Inserted into a Brava 1.25 chassis, this torsion blade can be adjusted to a soft or hard setting to help give the precise grip levels that you are needing.
Made for direct use with the Margay Brava 1.25 chassis, this rear torsion tube will help provide a strong level of grip to the rear end of the kart.
This torsion blade is made for the new style Margay racing chassis and provide a great level of grip options to the front end of the kart. It can be set in a soft or hard position to help dial in the front end handling of the kart. They are manufactured from billet aluminium.
This torsion bar fits all post-2000 Brava karts and all Ignite K3 karts.
These torsion bar clamps are made for karts with 1 1/8" or 28mm tubing. They provide a tight lock on your front torsion tubes, and a great look for the entire kart. They use 8mm hardware.
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
