- per page
Replacement battery cap for the Sniper V2 alignment system.
The new Zamp FS-8 is leaded with features, including: composite fiberglass lightweight shell for superior performance, air-flow vents, adjustable chin and scalp vents with rear exhausts, plush removable/washable moisture absorbent interior, interchangeable liner for custom fit, Z-19 series shield with lock button in closed position and Snell M2015 and DOT approved.
This is the OEM clutch drum from Hilliard used in the Fury, Flame and Blaze clutches. Keep your clutch fresh from season to season by replacing the clutch drum.
These brake pads are designed for use on the MCP front brakes and MCP MiniLite braking systems. These are the pads that come stock on all Brava C1 cadet karts, 2012 and newer.
Help keep your engine free of dirt and dust with this pre filter from Outerwear. This cover is to be used with the LO206 'Green' air filter, Briggs #555729. Check your local rules for legality.
The LO206 engine requires air to pressurize the fuel pump. This is achieved by running a line from the crank case to the top of the fuel pump (marked 'P'). This crank case fitting replaces the yellow oil fill plug on the top of the engine and allows the pump to get it's needed pressure.
The Hillard 3/4" is where where the clutch assembly all starts. If you are hearing any chattering or clinging, it may be time to replace the hub/guard.
This snap ring is used to connect the clutch hub and guard for the Hilliard Blaze, Flame and Fire clutches. This is not for use to connect the sprocket to the drum. Each snap ring is bowed, so once used and removed, it is recommended to install a new snap ring.
This vent tube kit plugs directly into the hole in the valve cover and is designed to route the excess oil flow from the head, into an acceptable catch can system.
The Hillard flame clutch is among the most durable and precise shoe style clutches on the market. A bullet proof design combined with several different tuning options makes this clutch a winner. Easy installation and changing make for fast adjustments when you need it the most.
This KG Bodyworks steering wheel is a customized flat top wheel with a Margay Racing logo embroidered on the top. It has red suede on the top of the wheel, black suede on the bottom, and extra sections in the middle designed to give your hands move overall grip. This wheel has a 11 1/2" diameter and is designed for rookie/cadet karts.
This bearing cassette is designed to work with a 1 1/4" axle bearing and a chassis with a 3 bolt mounting system. It is a light weight bearing cassette with a matte black finish.
This 3/8" bearing 17mm billet spindle assembly comes with everything you need to replace the left spindle on your Brava chassis. It comes complete with the spindle, tie rod end with hardware, wheel spacers, castle nut and safety clip. This package should have what you need to get you rolling again.